2L Pneumatic Auto Vacuum Brake Fluid Bleeder Pump Oil Fluid Transfer Extractor

Description

Click for More Pneumatic Manual Oil Changer Vacuum Tool
【1】 Large capacity collection reservoir can contain 2 liters of fluid, also includes an automatic master cylinder refill kit with a 1 liter reservoir (safety cup), which makes changing brake oil easy and simple for one man operation. One-time filling is faster and more convenient.
【2】This brake bleeder bleeds and flushes hydraulic brakes and clutches with a vacuum and is simple to use. This is a pneumatic bleeder and NOT a hand pump design.This will make brake bleeding a one-man job versus two.
【3】It contains a variable thumb throttle which maintains average air flow rate 2 cfm and a desired brake fluid flow rate. And the fixing ring lock keeps extracting oil continuously, efficiently and quicker. Built-in Integrated silencer of the pneumatic Bleeder allows the brake fluid to flow quietly through the silicone hose and makes a messy job cleaner, quicker and quieter.
【4】2L Vacuum Brake bleeder +1 L Refilling Bottle.The brake oil bleeder kit includes a silicone bleed hose with a universal rubber adapter that used with most standard and ABS brake systems, and a master cylinder evacuation hose especially for bleeding brake in master cylinder.
Easy to Bleed the Brake Oil
1. Wipe the brake master cylinder clean with a shop rag and remove the cap
Put the hose with extension thinner corrosion-resistant tube into the reservoir to extract all the old brake fluid from the master cylinder.
2. Fill the refilling bottle with the new brake fluid, and then fix it on the master cylinder reservoir to add new brake fluid up to the MAX mark.
Notice: Keep the reservoir filled all the time to prevent forming a vacuum during the procedure.
3. Clean the bleeder screw to prevent oil or grease from entering and blocking the bleeding tube.
Ready your vacuum pump by putting the universal rubber adapter on the brake nipple to connect the bleeder kit with the caliper.
Choose the correct line wrench size to turn the bleeder screw open.
4. Connect the bleeder kit to the air compressor.
Press the trigger to start bleeding. Keep bleeding until the fluid is coming out clean.
Then tighten the bleeder screw, remove the rubber adapter and put the dust cap back on.
Package List
1 x 2L Vacuum Brake bleeder
1 x 1L Refilling Bottle.
1 x Silicon bleeding hose
1 x Silicon  hose with Extension thinner corrosion-resistant tube
1x Instruction
VISIT OUR STORE
MORE PRODUCTS
MORE PRODUCTS
3 WARRANTY&SERVICE
FIVE STAR FEEDBACK
VISIT OUR STORE
MORE PRODUCTS
MORE PRODUCTS
3 WARRANTY&SERVICE
FIVE STAR FEEDBACK