Auto Car Brake Fluid Exchanger Electric Pump Extractor Oil Bleeder Replace Tool

Description

Auto Car Brake Fluid Exchanger Electric Pump Extractor Oil Bleeder Replace Tool
Description:
AUTOOL AST605 Automotive Brake Fluid Bleeder is a brake fluid exchanger equipment. The physical principle is to suck the brake fluid from the new fluid storage tank through a pump, and continuously pump it into the automobile brake fluid container at a specified pressure. Compared with the traditional compressing way to exchange brake fluid, this pulsating brake fluid exchanger can effectively avoid the generation of air bubbles during the filling process, thereby optimizing or avoiding the artificial exhaust process.
Features:
1. [One-person Operation&Time Efficient]: AUTOOL AST605 Automotive Brake Fluid Bleeder can be operated by one person, four wheels oil can be exchanged together. Four pumps exchange oil simultaneously can save time and labor.
2. [Electric Brake Fluid Exchange]: No need to connect an air compressor. AUTOOL AST605 Automotive Brake Fluid Bleeder comes with a built-in working pressure pump. Brake fluid can be exchanged by simply connecting 110V/220V power supply.
3. [Smart adjustment panel design&Pressure Gauge]: One-press fluid exchange. Complete the oil exchange within one minute, conveniently and quickly. Pressure and frequency can be freely adjusted. Equipped with a pressure gauge to observe the fluid exchange pressure value.
4. [Wide range of applicable models]: Come with a variety of adapters. Suitable for European, American, and Asian models.
5. [Three Years Warranty, Lifetime Maintenance]: For damage caused by non-human factors, AUTOOL promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
Operation Steps：
Step 1: Put the suction hose in the brake fluid bottle;
Step 2: Connect the adapter and the oil- drain pipeline;
Step 3: Turn on the equipment and adjust the pressure;
Step 4: Connect the fluid recycling bottle to the brake fluid dispense pump.
Technical Parameters:
Voltage: 220-240V 50/60Hz or 110-120V 50/60Hz;
Maximum power: 35W;
Maximum flow: 1.2 liters/min;
Working pressure: 0.6-3.0 bar;
Oil shortage protection: support;
Filling hose length: 3.5m;
Noise: ≦70dB;
Host size: 250×185×280mm;
Packing list:
1* AUTOOL AST605 Automotive Brake Fluid Bleeder Main Unit
3 *Adapters
1* Fluid recycling bottle
1* User manual