AUTOOL Pulsation Car Brake Fluid Bleeder Electric Brake Fluid Replace Tool Pump

Description

AUTOOL AST609
Car Pulsating Brake Oil Changer Single Clutch Slave Cylinders Brake Extractor Oil Pump Machine with 1000ML Bottle
Applicable to European, American and Asian car models
For one sub-pump changing oil at the same time, it is fast and labour-saving.
Adjustable pulse oil change, which can effectively clean the pipeline and change the oil more thoroughly.
Powerful recovery function, it can quickly recover used brake fluid at the same time.The air inlet port has a water separating and filtering device, which can separate the moisture in the air, avoid it mixing with the oil, and ensure the quality.
Two Pressure Modes
This brake fluid exchanger is available in standard and master modes.Please select either mode before starting the fluid exchange.
Two Types of Power Supply Methods
Support 12V Battery Power Supply.
Support 110V or 220V Electric Supply Socket.
The Preparation of Equipment Exhausting
It is necessary to fill the line with brake fluid to evacuate the air during the first time using.
Considerate Design Details
Every detail is designed for a better user experience.
Corrosion-Resistant Filling Bottle
For storing new brake fluid with 1 L capacity,which is durable and long-lasting.
Suitable For Various Models
Equipped with seven different types of 99% adapters,suitable for European,American and Asian models.
Specifications
Power Supply:DC 12V
Max. Power:35W
Max. Flow Rate:1.2L/M
Working Pressure:0-3 bar
Container Empty Protection:Yes
Filling Hose Length:3.5M
Noise:≤70dB
Main Unit Dimensions:220*255*360MM
Technical Parameters
Voltage：220-240V50/60HZ
Maximum flow: 1.2 L/min;
Fluid shortage protection: YES
Noise：S70dB；
Maximum power：35W；
Working pressure：0.6-3.0 bar；
The length of the filling hose：3.5m；
Dimension：250X185X280mm；
Package Listed
1* AST609
1* Power cord
1*Adapters set (7 adapters)
1* New fluid bottle
1* Old fluid bottle
2* Clips
1* Transformer
1* User manual
1*package box
Function Principle
1.Brake fluid is drawn from the fresh fluid bottle by a cylinder and continuously pumped at a specified pressure into the vehicle's brake fluid pump. Then, following the vehicle's original factory-specified sequence, bleeding the old brake fluid from each wheel brake sub-cylinder in turn until new brake fluid flows.
2.Compared to conventional pressurized brake fluid exchanger, this pulsating brake fluid exchanger effectively avoids air bubbles during refilling and optimizes or eliminates the manual brake bleeding process.
3.Built-in pressure monitoring device. If pressure cannot be built up or the cylinder draws air, then the cylinder is disconnected, preventing the air from being introduced into the vehicle's brake fluid container.
4.Layout / Workstation
Place the brake fluid exchanger on a flat surface. Make sure the filler hose is not under mechanical stress, such as when lifting the vehicle onto a lift. The work station is located around the brake fluid switch during start-up and operation. In other cases, the stationary work station for the brake fluid switch is not specified.
User's guidance
Initial start-up/equipment self-emptying
Warning: in any case, air-emptying must be performed at the first start-up.
* Place the brake fluid exchanger firmly on a flat surface.
* Unscrew the filling sealing cover of the top cover of the fresh fluid bottle.
* Pour new brake fluid into the new fluid bottle and insert the suction hose and pressure balancing hose into the new fluid bottle up to the bottom.
* Place the new fluid bottle in the bracket of the brake fluid exchanger to prevent it from tipping over.
* Connect the power supply to the brake fluid exchanger and turn on the switch.
* Select the Standard mode, press the "Start" button, and turn off the power after 3 seconds working.
* Brake bleeding is possible by recovering through a fresh fluid bottle until the brake fluid is purged of any air bubbles and overflowing.
Operation
Exchanging the brake fluid
Warning：The specifications in the safety guidelines must be strictly complied.
* Before start the operation, pay attention to the vehicle manufacturer's tips on maximum filling pressure and special work instructions.
* As a matter of principle, for each model of vehicle, the guidelines and criteria provided by the manufacturer for emptying the brake equipment are always valid.
* If there is no special state of the working pressure value in the guidelines and criteria for emptying brake equipment provided by the manufacturer, this brake fluid exchanger provides 2 pressure modes: Standard mode 0-1.5 bar (5 minutes); Fast mode 0- 2 bar (3 minute);
The standard mode is defaulted when switch on.
If a specific working pressure is required, it can be switched   and it must be in a non-working state when switching.
* Install the additional adapter, or select the appropriate adapter according to the instructions, on the vehicle's brake fluid container.
* Connect the filling hose to the installed adapter.
* Lift the car to the right height, unscrew the drain valve on the brake sub-cylinder, and connect the old oil bottle.
* Turn on the switch and press the "Start" button. Check that the adapter on the brake fluid container is in the proper position and that it is sealed. If there is brake fluid overflow, press the "Stop" switch immediately and find out the cause.
AUTOOL AST605
AUTOOL AST605 Automotive Brake Fluid Bleeder
is a brake fluid exchanger equipment.
The physical principle is to suck the brake fluid from the new fluid storage tank through a pump, and continuously pump it into the automobile brake fluid container at a specified pressure. Compared with the traditional compressing way to exchange brake fluid, this pulsating brake fluid exchanger can effectively avoid the generation of air bubbles during the filling process, thereby optimizing or avoiding the artificial exhaust process.
Features:
1. [
One-person Operation&Time Efficient
]: AUTOOL AST605 Automotive Brake Fluid Bleeder can be operated by one person, four wheels oil can be exchanged together. Four pumps exchange oil simultaneously can save time and labor.
2. [
Electric Brake Fluid Exchange
]: No need to connect an air compressor. AUTOOL AST605 Automotive Brake Fluid Bleeder comes with a built-in working pressure pump. Brake fluid can be exchanged by simply connecting 110V/220V power supply.
3. [
Smart adjustment panel design&Pressure Gauge
]: One-press fluid exchange. Complete the oil exchange within one minute, conveniently and quickly. Pressure and frequency can be freely adjusted. Equipped with a pressure gauge to observe the fluid exchange pressure value.
4. [
Wide range of applicable models
]: Come with a variety of adapters. Suitable for 99% European, American, and Asian models.
5. [
Three Years Warranty, Lifetime Maintenance
]: For damage caused by non-human factors, AUTOOL promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
Built in Pressure Monitoring System
Equipped with a pressure monitoring device, the brake fluid exchange pressure can be adjusted by turning the knob. The range of pressure is 0-3 BAR.
If pressure cannot be built up or the pump sucks in air, the pump will automatically shut down.
Once-click Exchange
This product only requires one person to operate, and allows you to easily use and change the brake oil. It can change the oil of four sub-pumps at the same time. After setting the working environment, just pressing the 'start' button for simple operation
Powerful Recovery Function
Auto AST605 brake fluid exchange can quickly recover the used brake fluid at the same time. When the time comes, the air inlet is equipped with a water separation and filtration device, which can separate the water in the air, avoid mixing with oil, and ensure the quality.