-40%

SYNCO MC4 Audio Mixer USB 4-Channel Mixing Console For Stage Tuning Studio Music

$ 15.31

Availability: 88 in stock
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Features: Bluetooth
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • MPN: MC4
  • Number of Channels: 4
  • Suitable For: Home Recording
  • Brand: Synco
  • Type: Mixing Console
  • Condition: The item has been tested and found to be in 100% working order and great physical condition.It isn't brand new, but performs exactly the same as a brand new one. Barely used, very new.

    Description

    Product Description
    Synco MC4 : A Multi Functional 4 channel Mixer!!
    Synco MC4 Multi-Functional 4 Channel Mixer
    Features:
    4-Channel Tuning
    USB/Bluetooth Connection
    Reverb Tuning Capability
    Micro-USB Charging/48V Phantom Power
    Lightweight & Small Body
    USB/Bluetooth Connection
    Digital Display
    Audio Monitoring/HD Headset Output
    4-Channel Tuning
    SYNCO MC4 mixer supports 4 channels tuning, and can delivery wonderful sound by adjusting high pitch, bass, reverb, gain and volume. Real-time audio monitoring is accessible.
    USB/Bluetooth Connection
    Built-in Bluetooth module allows wireless connection with Smartphone and iPad. The mixer can also read U-disk files through USB interface. Convenient for tuning audio from different devices.
    Audio Monitoring
    SYNCO MC4 mixer supports real-time audio monitoring by providing a headphone jack. You can listen to the sound effects while you are tuning it.
    Digital Display
    Through the digital display, you can check the mixer’s working status, like LINE/BT/PC connection, as well as play/record mode. Thus simplifying and speeding up the whole process.
    Please follow the below step if you meet some question when using:
    Question:Unable to Connect to the computer.
    1.Check whether the power supply current of the computer is above 500 mA and the voltage is above 5V.
    2.Check the button on the back of the mixer has been pressed, need to switch the mode to PC.
    3.Check if there is any problem with the USB interface of the computer, try another USB interface or another computer.
    4.Check if there is any problem with the USB cable, try another cable, the screen shows that the PC is successfully connected.
    Question
    :
    The Bluetooth connection is unsuccessful.
    Check if the MODE/BT button is pressed to switch the mode, the screen displays BT stands for Bluetooth mode, the screen will flash during pairing, and the screen will not flash when the Bluetooth connection is successful, the Bluetooth name is MIXING BT.
    Question:There is noise during recording.
    1.Check if the power supply of the computer is above 500mA and the voltage is above 5V.
    2.Try another USB cable, because an unstable connection will cause noise.
    Question
    :
    The microphone sound is low.
    Use the XLR three-pin plug cable to connect the microphone to make the sound louder. It is recommended to use a condenser microphone. This mixer is more suitable for condenser microphones.
    Question :There is no sound when connecting the USB to play music.
    Check if the USB button on the front of the mixer is pressed.
    Question:Reverb and delay adjustments have no effect.
    Make sure the channel EFX button has been pressed, and then adjust the yellow area knob to adjust the reverb and delay effects.
    Channel Number
    4
    Input Interface
    XLR, 6.3mm, RCA
    Output Interface
    6.3mm, RCA
    Total Harmonic Distortion
    ≤0.1%
    Frequency Response
    20Hz~20KHz/±0.5dB
    Input/Output Impedance
    ●MIC:2.4KΩ ●Mono:11KΩ ● Stereo:100KΩ
    Outputs
    4V Max
    Signal-to-noise Ratio
    ≥80dB
    Parametric EQ.
    ●High:12KHz±15dB ●LOW:80Hz/±15dB
    Input Channel Sensitivity
    ✔MIC: -60dB ✔ Stereo CH.Input: -40dB ✔EFX Send: -20dB ✔EFF Return: -20dB
    Size
    18×15cm / 7×5.9in
    Weight
    0.43kg