[Raidonode]Carbon Monoxide Monitoring Data Logger(Free Shipping Promotion Price)

Description

The UA53-CO device is a cost-effective Carbon Monoxide(CO) transmitter. It has an electrochemical CO sensor inside and
transmits the measured CO density and temperature information in real-time via the USB connector.
The UA Series is automatically recognized as a serial port on the operating system and accessed using the AT command.
Multiple USB connections of the UA device could compose the multi-channel sensor. The sensor data is not stored in the
UA, but recording in PC and Android device. 128CH real time monitoring software on pc, Tapaculo Lite is downloadable on
our website(www.radionode365.com). And android real time recording application is also available from google play store.
The optional RN17X model helps UA series for you to setup remote web monitoring system.
Radionode Introduction
https://www.youtube.com/watch?v=QqDwRrd69sk
Website
https://radionode365.com/en/
Dedicated Cloud Web Service (Based on Amazon Web Service)
• Conserves 3years data
• Auto Report with MKT(Mean Kinetic Temperature)
• AI Real-Time Alerts (Deviation, Power Outage, Door Open) - TTS
• QR Code Scanning
→
easy to access and control
• Original Report
→
no risk for forgery and alternation
• Audit Trail (FDA 21 CFR Part 11 Compatible)
Key Features
•
Carbon Monoxide and Temperature at the same time,
Clear LED Display
•
Modbus TCP, HTTP, Telnet,
Support Cloud Storage,
Wifi network,
Internal buzzer alarm,
3,000 raw data back-up
•
Compatible with the Qlight warning tower,
Real-Time traceable Temperature Graph
Product Specification
•
Size: Transmitter: H 90.4 x W 50.4 x D 35.1 mm + Cover : H 141.9 x W 50.4 x D 40.5mm,
USB type sensor: W 68.5 x H 15 x D 25 mm
•
Sensor: Semiconductor type sensor
•
Operation Condition: Temperature: -20~40℃ (-4~104°F), Humidity: 15~95%RH (non condensing)
•
Measuring Range
:
Carbon Monoxide: 0~1000ppm, Temperature: -20~40
℃ (-4~104
°F)
(
CH1: CO, CH2: Temperature)
•
Measurement Interval: Min: 1 sec,
Response Time: T90 < 30 secs,
Warm-up Time: 1min after power on
•
Resolution: CO: 0.01ppm,
Temperature: 0.01
℃
•
Accuracy: Carbon Monoxide:
±
2%,
Temperature:
±0.2℃
•
Humidity Sensitivity: < 10ppm,
Drift: 2% signal loss / 1 year,
Output: USB Digital, CDC Device (AT command)
•
USB Port: USB 2.0 Type A Plug,
Lifetime: < 5 Years,
Calibration Method: Two point calibration
•
Power Consumption: 5V (Max. 185mW),
Communication protocol: IEEE 802.11 b/g (WEP, WPA, WPA2)
•
HTTP transmission protocol: RADIONODE PROTOCOL V2, HTTP GET/POST,
MODBUS TCP: PORT 502, HOLDING REGISTER (03)
•
Data Transmission interval: Every minute (minimum),
Telnet/Broadcasting: TCP Port 23/ UDP Port 50000
•
Power consumption: DC 6V (2.4W),
Manufacturer: DEKIST Co.,Ltd
Application
• Smart Farm
• Industrial safety
• AIR Quality Monitoring
• Bio-labs
• Building environment monitoring
• Air Purification Control
Product Contents
•
RN172 plus (Transmitter),
UA53-CO (USB type sensor),
Sensor protection cover,
USB cable for setting,
USB extension cable,
USB OTG gender (USB A to USB C),
Quick guide,
6V DC adapter,
Calibration certificate
remote temperature monitoring,
temperature monitoring device,
temperature and humidity monitoring,
temperature sensor monitoring system,
wifi temperature monitoring,
temperature monitoring equipment,
remote temperature monitor,
fridge temperature monitoring,
iot temperature monitoring,
temperature and humidity monitoring system,
temperature sensor,
temperature monitoring solutions,
pharmacy fridge temperature monitoring,
data centre temperature monitoring,
warehouse temperature monitoring system,
wireless temperature monitoring system,
warehouse temperature monitoring,
lab temperature monitoring,
oxygen monitoring device,
wireless data logger,
digital data logger thermometer,
temperature data logger wireless,
fridge data logger,
wifi data logger,
data logger thermometer,
thermocouple data logger